Copper wire brush strip-introduction to the use of copper wire steel strip brush_FAQ

Copper wire brush strip manufacturers supply iron sheet copper wire brushes. According to customer requirements, they can choose high-quality copper wires of various specifications, straight copper wires, phosphor copper wires, etc., which can be used for hardware polishing, deburring, metal surface treatment, cleaning, etc. Quality Assurance. The factory has a long history and operates in good faith. Welcome to contact and discuss cleaning up after welding. Residual flux and welding slag left on the weld and nearby will damage the passivation film on the aluminum surface and sometimes corrode the aluminum parts, so they should be cleaned up. Workpieces with simple shapes and general requirements can be cleaned by simple methods such as hot water washing or steam blowing. Aluminum parts with high requirements and complex shapes, after scrubbing with a hard brush in hot water, they are then immersed in a chromic anhydride aqueous solution or potassium dichromate solution at a concentration of 2% to 3% at a concentration of about 60℃～80℃5 ～10 minutes, and scrub with a hard brush, then rinse in hot water, dry in an oven, or blow dry with hot air, or dry naturally. Welcome to www.mxbrushmachinery.com