Brushes are used to prevent dust, polishing, cleaning, and grinding_FAQ

The application of industrial brushes in the industry is mainly manifested in four aspects: dustproof, polishing, cleaning, and grinding. The following Anhui Meixin Brushes will introduce the specific use of each brush in detail. The main purpose of dust-proof brushes is to install at the inlets and outlets of industrial equipment, assembly lines, doors and windows, etc., to prevent dust from entering through these gaps and polluting equipment and products. Therefore, the requirements for brushing wire are high elasticity. The surface of the brush wire is lubricated well, and it has antistatic function. Brushes, brush factories, industrial brushes, brush rollers. The polishing brush is mainly used to deburr and finely polish the surface of the thrown object. Therefore, the type and characteristics of the brush wire must be determined according to different requirements. If it is a steel plate with strong hardness, the surface needs to be electroplated and polished. The most ideal brush wire should be bronze wire. If it is a general metal material for surface derusting and deburring, then steel wire with better hardness can be used; 　　 cleaning brush is the most commonly used industrial roller brush, generally used for The cleaning of fruits and vegetables in the deep processing of agricultural and sideline products and general cleaning and dust removal in the industry require good wear resistance, high elasticity and corrosion and aging resistance. If the brushing performance is not good, it is not easy to deform. , When the object is placed in a certain position for a long time, it will cause the brush roller to appear grooves, destroy the use function of the roller brush, and even cause the entire brush roller to be scrapped; 　　 abrasive brushes are used less, and general industrial grinding will directly It is done with abrasive tools such as grinding wheels. These are not within the scope of industrial brushes, but for the textile industry to sanding, it is necessary to use the abrasive wire brush roller containing silicon carbide. The number of silicon carbide contained in the abrasive wire is (Density) should be properly adjusted with the strength of the fabric to be polished and the effect that needs to be polished. Welcome to www.mxbrushmachinery.com