Brush roller pressure control and layout and application_FAQ

The characteristic of cylinder pressure is that the pressure exerted on the brush roller is constant. With the wear of the bristles, the center of the brush roller continues to drop, so the scrubbing effect is basically unchanged, but the wear on the bristles is getting more and more serious. The distance between the two ends and the steel belt is not easy to control, and it is easy to make the steel belt deviate. The characteristic of screw reduction is that the pressing amount of the scrubbing roller is basically constant. With the wear of the bristles, the pressing amount is gradually reduced, so the cleaning effect gradually becomes worse. Only by adjusting the screw again can the pressing force be achieved. Restore again. Regardless of which type of pressing is used, you must pay close attention to the current of the brush roller drive motor. The change in current can best reflect the size of the pressing force. Controlling the current can ensure the overall brushing effect. In general design, in order to prevent the position of the steel belt from shifting under the pressure of the brush roller and affect the scrubbing effect, the method of setting a support roller at the position corresponding to the brush roller is adopted. However, some researches believe that in the case of steel with waves and vibrations, the reduction of the brush roller will continue to change, which will affect the cleaning effect and the life of the brush roller. If it is changed to the form of brush roller to brush roller, the actual position change of the steel strip caused by the wave shape and vibration of the steel strip will be absorbed by the other brush roller, and the fluctuation of the reduction amount is only half of the original, so the cleaning effect is more and more effective. The life of the brush roller is improved. And this can reduce the length of the equipment and save investment. Our factory mainly produces special-shaped brushes for industrial machinery, brush rollers, brush trays, brush belts, stainless steel spring coiled brushes, rubber rollers, and sponge suction rollers. It is widely used in industrial machinery cleaning, polishing, dust removal, rust removal, grinding, cleaning, gluing and conveying. The main applicable industries are: glass industry, leather industry, footwear industry, textile printing and dyeing industry, wood industry, furniture industry, electronics (computer) production industry, printing industry, watch industry, galvanized sheet production industry, food and beverage industry, tobacco Cleaning and cleaning brushes for various special industries such as industrial, carton industry, printing industry, lighting appliance cup washing industry, military industry gun washing, highway cleaning and so on. Based on the tenet of striving for survival by quality and seeking efficiency by products, our factory wholeheartedly serves the majority of users. Welcome to log in: www.mxbrushmachinery.com; contact Xu Shengli