Brush making equipment - automatic flat hair machine - flat hair flowering machine - high-speed hair planting machine manufacturer

The transmission structure of the high-speed flocking machine consists of a main drive shaft and four servo drive shaft systems. The four servo axes are the horizontal X axis, the vertical Y axis, the molting Z axis and the rotation A axis. The XY two-axis coordinates determine the position of the toothbrush hole, the A-axis plays the role of changing to the next toothbrush, and the Z-axis plays the role of changing the color of the toothbrush. When the spindle motor (controlled by the frequency converter) is running, the four electronically controlled servo axes will run along with it, and the other four axes will stop following when the spindle stops. The rotational speed of the main shaft determines the speed of hair planting, and the four servo shafts respond to the request for a harmonious drive, otherwise there will be hair loss or uneven hair. In order to prevent the above problems, the editor thinks that when operating the high-speed hair planting machine, you should pay attention to the following problems: 1. When the machine is started, do not open the door on the right side of the fuselage to prevent clothing and other objects from getting caught in the belt. 2. Do not put your hands into the started machine. 3. Do not drop tools or other items such as brush handles into the running machine to prevent damage to the parts caused by the impact of the hair planting head or the bristle knife. 4. If the parts are worn, please replace them as soon as possible to prevent other local parts from being damaged together or producing poor quality waste products. 5. Pay attention to the cleaning, maintenance and smoothness of the machine. 6. Add clean 46-48# hydraulic oil to the fuel tank. 7. The oil cup of the intake filter pressure regulating valve should be filled with the gas mist oil of the gas valve. In addition, the working process of the high-speed hair planting machine is as follows: Action process: the clip clamps the toothbrush according to the Y-axis direction → the clip is positioned 90 degrees to the Z-axis direction → the platform drives the clip to do X, Y axis movement so that the bristles can be hit In the pores of the toothbrush head → the hair planting is completed, the clip is rotated downward by 90 degrees → the clip is released, and the processing of a toothbrush is completed. The application of the company's (Xinjie) XDM series plc and DS5 servo system can achieve a hair planting speed of 900 times/min. And at the same time of high-speed start and stop, the smoothness and gentleness of the overall action are more prominent. Through the application of the self-made pulse S-curve in the PLC, the jumping hole can be planted, and when the hole is jumping, the machine is as stable as usual while the hole jumping accuracy is guaranteed, and there will be no obvious vibration. As long as you clearly know the working principle of the hair planting machine, you can better grasp the speed and quality of the hair planting.
https://www.mxbrushmachinery.com/