Brush making equipment - automatic flat hair machine - flat hair flowering machine - high-speed hair planting machine manufacturer

Brush equipment is widely used in life now, and it is used in many places in work and production, but the quality of the line brush has a great relationship with the work flow of the hair planting machine. Next, the editor of Lanbang Machinery will share with you the working process of the high-speed hair planting machine. The precise process operation of the high-speed flocking machine: 1. The fair use of flocking (fleece) pulp plays a crucial role in the flocking process. First, a certain amount of additives (1.5%-2%) are added when the flocking (fleece) pulp is applied. ) or additives, add 1:1 water to mix and mix, and then add the slurry to mix evenly. The prepared slurry must be used immediately and cannot be left for too long (within 8 hours), otherwise cross-linking will occur at the deformation temperature. Affect use, this is a matter to be paid attention to during operation. If the flocking pulp is too thick during printing, you can add an appropriate amount of water to dilute it, which is helpful for benign operation. 2. It is recommended to use 800 mesh (80 mesh) plate making, screen printing: pay attention to the last printing of flocking (fleece) pulp and the time of flocking operation, there must be no gap of 1 minute, and the number of printings depends on the relevant fabric. time and other factors. 3. The cloth is naturally dry and can be washed with water at 60°C after 24 hours. If the customer requires strict quality, it must be baked at 160 ° C for 10-60 seconds. Of course, the baking temperature and time also need to be adjusted according to the relevant fabric and requirements. 4. The final process of fabric hair planting is to clear the tail process. After using the wool suction machine to absorb the hair, stick the remaining part of the fabric with adhesive tape for shipment.
https://www.mxbrushmachinery.com/