Brush making equipment - automatic flat hair machine - flat hair flowering machine - high-speed hair planting machine manufacturer

The transmission structure of the high-speed toothbrush hair planting machine consists of a main drive shaft and four servo drive shaft systems. The four servo axes are the horizontal X axis, the vertical Y axis, the molting Z axis and the rotating A axis. The XY two-axis coordinates determine the position of the toothbrush hole, the A-axis plays the role of changing to the next toothbrush, and the Z-axis plays the role of replacing the toothbrush hair color. When the spindle motor (controlled by the inverter) runs, the four electronically controlled servo axes run along with it, and when the spindle stops, the remaining four axes stop along with it. The rotational speed of the main shaft determines the speed of hair planting, and the four servo axes respond to the requirements of coordinated drive, otherwise hair removal or uneven hair will occur. In order to avoid the above problems, the editor thinks that the following problems should be paid attention to when operating the high-speed hair planting machine: 1. When the machine is started, do not open the door on the right side of the fuselage to avoid items such as clothes being caught in the belt. 2. Do not put your hands into the started machine. 3. Do not drop tools or other items such as brush handles into the running machine to avoid damage to the parts caused by the impact of the hair planting head or the hair hooking knife. 4. If the parts are worn, please replace them as soon as possible to avoid common damage to other parts or poor quality finished products. 5. Pay attention to the cleaning, maintenance and lubrication of the machine. 6. Add clean 46-48# hydraulic oil to the fuel tank. 7. The oil cup of the intake filter pressure regulating valve should be filled with the gas mist oil of the gas valve. In addition, the working process of the high-speed hair planting machine is as follows: Action process: the clamp clamps the toothbrush handle from the Y axis direction → the clamp is positioned 90 degrees to the Z axis direction → the platform drives the clamp to do X, Y axis movement so that the bristles can be hit In the pores of the toothbrush head → the hair planting is completed, the clip is rotated downward by 90 degrees → the clip is released, and the processing of a toothbrush is completed. The application of the company's (Xinjie) XDM series plc and DS5 servo system can achieve 900 times/min hair planting speed. And at the same time of high-speed start and stop, the stability and softness of the overall action are more prominent. Through the application of the self-made pulse S-curve in the PLC, the jumping hole can be planted, and when the hole is jumping, the machine is basically as stable as usual while the hole jumping accuracy is guaranteed, and there will be no obvious jitter. Only by clearly knowing the working principle of the hair planting machine can we better grasp the speed and quality of the hair planting.
https://www.mxbrushmachinery.com/