Brush applied to layering technology application management_FAQ

Anhui Meixin Brush Factory, the polishing machine is a machine commonly used by pharmaceutical manufacturers. It uses a brush to polish, which can quickly remove the adhering powder on the surface of capsules and tablets to make them clean, thereby improving their surface finish. This kind of machine has a closed conveying structure. The parts in contact with the medicine are made of non-toxic and corrosion-resistant materials. The structure is simple, not easy to damage, long service life, convenient operation and maintenance, good polishing performance, and high efficiency. This kind of pharmaceutical special equipment can polish and clean the powder attached to the capsules and tablets. The polished capsules are brighter, cleaner and more beautiful, meeting the requirements of GMP specifications.　　 medicinal capsule polishing machine is mainly composed of hopper, polishing cylinder, sealing cylinder, brush, coupling, split bearing seat, motor, power distribution box, waste removal head, discharge hopper and frame. The working principle of the medicinal capsule polishing machine is to drive the capsule to move in a circular spiral along the wall of the polishing tube through the rotating motion of the brush, so that the capsule moves along the spiral spring. Under the constant friction between the brush and the wall of the polishing tube, the capsule The outer surface of the shell is polished, and the polished capsule enters the waste hopper from the discharge port. In the de-waste device, due to the negative pressure, the light-weight unqualified capsules rise under the action of the airflow and enter the vacuum cleaner through the suction tube. The heavy-weight qualified capsules continue to fall and are discharged through the movable discharge hopper to effectively achieve polishing. To eliminate the purpose. The powder and small fragments that are brushed off during the polishing process enter the sealed cylinder through the small holes on the wall of the polishing cylinder, and the industrial brush is sucked into the vacuum cleaner for recovery.　Welcome to www.mxbrushmachinery.com