Brief introduction of three-axis three-head round brush drilling and tufting machine (horse nail type)

Three-axis three-head round brush drilling and tufting machine (horse nail type) Features: 1) This machine is equipped with two drilling heads and one tufting head, which is mainly used to make small industrial round brushes. Drilling and planting are carried out synchronously. After drilling the holes, the workbench automatically moves the brush handle under the planting head for planting, which effectively and greatly reduces the manpower requirement. 2) Equipped with 5.4 inch touch screen. According to customer needs, the operation interface can be equipped with different languages u200bu200bsuch as Chinese, English, Spanish, French, and Turkish. 3) Equipped with PLC, the machine runs accurately and has stable performance. 4) The worktable is composed of linear guides and high-precision screw rods, which are stable in operation and durable. 5) In the 'parameter modeTechnical parameters of the three-axis three-head round brush drilling and tufting machine: Precautions for using the three-axis three-head drilling and tufting machine: 1) Each shift of the tufting machine should add drops of lubricating oil to the moving parts to reduce mechanical wear. 2) Regularly check whether the screws are loose, and they should be tightened in time. 3) Keep the guide rail and screw rod clean to avoid debris sticking to the guide rail or screw rod and affect the accuracy of work positioning. 4) Ensure that the electric box works in a ventilated environment, avoid humid or high temperature environments, and prevent the electric box from violent vibration. 5) The electric box cannot work in a strong electromagnetic field environment, otherwise uncontrolled situations may occur. 6) The input power wiring must be correct (red, blue, and yellow wires are respectively connected to 380V three-phase wire, green wire is connected to neutral wire, yellow-green phase wire is grounded), pin numbers: 1, 2, 3 are 380V phase wires, 4 Zero wire, 5 ground wire. The working voltage should be stable and kept at AC380±10 V. Excessive voltage may cause the electronic components to burn out. 7) It is forbidden to hit the touch screen with hard objects, otherwise the sensitivity will decrease, or even break the glass screen. 8) It is forbidden to pull the cable too strongly. 9) There is high voltage in the electric box. When a fault occurs, non-professionals should not disassemble it to prevent electric shock or even damage to system data.