Brief introduction of three-axis three-head circular brush drilling and tufting machine (horse nail type)_Latest News

Three-axis three-head circular brush drilling and tufting machine (horse nail type) features:

1) This machine is equipped with two drilling heads and one tufting head, which is mainly used to make small industrial round brushes. Drilling and tufting are carried out simultaneously. After the drilling is completed, the workbench automatically moves the brush handle to the tufting head for tufting, which effectively and greatly reduces the manpower requirement.

2) Equipped with a 5.4-inch touch screen. According to the needs of customers, the operation interface can be equipped with Chinese, English, Spanish, French, Turkish and other languages.

3) Equipped with PLC, the machine runs precisely and has stable performance.

4) The workbench is composed of linear guide rails and high-precision screw rods, which is stable in operation and durable.

5) at“parameter mode”The process of creating a round brush can be completed within one minute, which is simple and efficient.

Technical parameters of three-axis three-head circular brush drilling and tufting machine:

Precautions for using three-axis three-head drilling and tufting machine:

1) Lubricating oil should be added to each moving part of the tufting machine in each shift to reduce mechanical wear.

2) Regularly check whether the screws are loose and tighten them in time.

3) Keep the guide rail and screw rod clean to avoid debris adhering to the guide rail or screw rod, which will affect the accuracy of work positioning.

4) Ensure that the electrical box works in a ventilated environment, avoid a humid or high temperature environment, and prevent the electrical box from violent vibration.

5) The electrical box cannot work in an environment with strong electromagnetic fields, otherwise uncontrolled situations may occur.

6) The input power wiring must be correct (red, blue, and yellow wires are respectively connected to 380V three-phase wires, green wires are connected to neutral wires, and yellow-green interphase wires are ground wires). Pin numbers: 1, 2, 3 are 380V phase wires, 4 Zero wire, 5 ground wire. The working voltage should be stable and kept at AC380±10 V, excessive voltage may cause electronic components to burn out.

7) It is forbidden to hit the touch screen with hard objects, otherwise it will reduce the sensitivity or even break the glass screen.

8) Do not pull the cable too hard.

9) There is high voltage in the electrical box. When a fault occurs, non-professionals should not disassemble it to prevent electric shock or even destroy system data.