Are you sure not to take a look at the process of making twisted wire brushes? _common problem

The twisted wire brush has many applications because of its simple structure and strong plasticity. Today we will get to know its production process. There are two types of machines for processing twisted wire brushes: traditional and automatic. What we are sharing today is the production process of the automatic machine. The first is to cut the raw material wire into sections according to the standard specifications, and then put the cut wire into the wire slot. Before that, the wire twisting machine has placed the skeleton raw material, and the production can be officially started. Using fully automatic production equipment to produce, the brush filaments and skeleton will be quickly and tightly twisted together in equal distances, and it is not easy to shed hair. After finalizing, cut according to the set length, and a conventional twisted wire brush is ready. However, some twisted wire brushes with tapered (or other special shapes) and long and short hairs that we have seen need to add one more process to the wire-flying hair. According to the specified outer diameter, the wire can be mechanically trimmed. Finish. The use of automated production equipment can ensure the accuracy of dimensions and tolerances, but it is difficult to ensure the accuracy of manual production. If you need a custom twisted wire brush, it is recommended to cooperate with a large manufacturer to ensure product quality. Of course, the work of quality inspection is indispensable. During the quality inspection, it is necessary to check that the skeleton is not rusty or corroded. The brush wire has no obvious unevenness. If it is too long, it needs to be trimmed manually. The hair is naturally distributed along the spiral radial direction, and the density is uniform. . The product has no obvious color difference in the same batch, whether it is the color of the skeleton or the wire. Of course, the work of quality inspection is indispensable. During the quality inspection, it is necessary to check that the skeleton is not rusty or corroded. The brush wire has no obvious unevenness. If it is too long, it needs to be trimmed manually. The hair is naturally distributed along the spiral radial direction, and the density is uniform. . The product has no obvious color difference in the same batch, whether it is the color of the skeleton or the wire. The production process of the twisted wire brush is roughly as described above. For more technical exchanges, you can add attention or leave a message to the editor.