Application and correct selection of industrial brushes_FAQ

The use of industrial brushes 1. Industrial brushes are used in the surface treatment of metals. There are three main aspects: (1) rough surface treatment (grinding, napping, rust removal) (2) surface cleaning treatment (decontamination, degreasing) (3) ) Surface finishing treatment (grinding, deburring, polishing) 2. Material selection for industrial brush applications: The correct selection of industrial brushes must first be based on the physical and chemical properties of the material to be processed, such as the surface finish, hardness, etc., to select the appropriate brush Silk material; select the appearance of the brush according to the working conditions; calculate the size and speed of the brush according to the process parameters. In general, the larger the diameter of the round brush, the better the effect. Under the same diameter condition, the shorter the brush wire, the stronger the grinding force, and the longer the brush wire, the weaker the grinding force. 3. Treatment methods for using brushes that do not achieve the expected results: (1) Brushing effect is too weak:-Choose a brush with a large diameter or increase the speed (not exceeding the **** speed) to increase the linear speed,-reduce the length of the wire, ——Use a thick wire brush instead. (2) The brushing effect is too strong:-Choose a brush with a small diameter or reduce the speed to reduce the linear speed,-increase the length of the wire,-use a brush with a thin wire. (3) The surface is too rough:-Choose a brush with a large diameter or increase the speed (not exceeding the maximum speed) to increase the linear speed,-reduce the length of the wire,-use a thick wire brush. (4) The surface is too smooth-choose a brush with a small diameter or reduce the speed to reduce the linear speed,-increase the length of the wire,-use a brush with a thin wire.