Analysis on how to choose the brush plate of the scrubber_common problem

With the rise of labor costs, modernization and efficiency of production, people's requirements for cost calculations and sanitation are gradually increasing. Cleaning equipment has gradually been recognized by all walks of life due to its high efficiency, energy saving, and low cost. It plays a huge role in various fields. Floor scrubbers are widely used in various industries. The scrubbing machine cleans the ground, mainly relying on the scrubbing brush of the scrubbing machine to scrub the ground, so the importance of the scrubbing brush is self-evident. So how to correctly choose the brush plate of the scrubber? Cement, terrazzo and floor tiles have relatively low requirements for floor cleaning, and they are also more wear-resistant. Use the nylon scrubbing brush that comes standard with the scrubber. If the floor is particularly dirty or the oil has accumulated throughout the year, you can consider using a wire brush at the beginning of cleaning. For epoxy floor and waxed floor, this kind of floor is not wear-resistant. It is suitable to choose medium hardness or soft brush, or choose red scouring pad, which is a soft scouring pad, for cleaning, but choose to use One thing to pay attention to is that the brush should not be left in place for too long, otherwise it will damage the floor. For machinery processing plants with heavier oil pollution on the ground, the brush plate alone cannot be cleaned, so a certain proportion of carburetor or detergent must be used to clean the ground.