About the overview of coal mine cleaner_common problem

Sweepers are the main parts of belt conveyors that are widely used in steel, mines, docks, cement plants, coal mines, power plants and other industries. After more than ten years of brush-making experience and technical updates, our factory. First introduced a new mechanical cleaning brush roller, namely coal mine belt conveyor line cleaning brush, brush roller. This brush roller is suitable for coal mines, thermal power companies, thermal power plants, iron and steel plants, petrochemical companies' coal conveying lines, and large-scale dock mechanical handling operations. Such as the special spiral brush roller for coal conveying machinery and bridge, and the herringbone brush roller. The brush roller can effectively clean the attachments on the surface of the roller and the bottom surface of the conveyor belt. The motor drives the nylon brush roller so that the tip of the brush roller slightly contacts the surface of the belt. At this time, the direction of rotation of the spiral brush roller is opposite to that of the return conveyor belt. So as to clean up the attachments on the conveyor belt. Brush roller and prevent deviation of the belt. Extend the service life of conveyor belts and other accessories. It is an indispensable cleaning accessory for industrial machinery. Nylon brush roller production process: brush body engineering plastic tube, 304 stainless steel, silicon carbide abrasive brush, alumina abrasive brush wire. 1010 nylon domestic brush filament. The brush roller is made according to the special requirements of the mechanical conveyor belt. The surface arrangement of the brush roller is arranged by the two ends of the middle phase to remove the attachments. It can also be arranged from one end to the other end. Can be customized. Bandwidth BACD speed ratio motor power SZ-BCB-050 500 500 1720 220 1/10 1.1 kw SZ-BCB-065 650 650 1870 220 1/10 1.1 kw SZ-BCB-080 800 800 2020 220 1/10 1.1 kw SZ-BCB-100 1000 1000 2220 320 1/10 1.5 kw SZ-BCB-120 1200 1200 2420 320 1/10 1.5 kw SZ-BCB-140 1400 1400 2620 320 1/10 1.5 kw SZ-BCB-160 1600 1600 2850 320 1/10 2.2 kw SZ-BCB-180 1800 1800 3050 320 1/10 2.2 kw Note: 1. The rolling brush wire material is made of DuPont non-water-soluble wear-resistant adhesive (polyurethane), which has excellent bending ability, high wear resistance, good elasticity, acid and alkali resistance, and can fully clean the uneven surface of the belt. 2. The brush filament has low water absorption and excellent self-cleaning function, which is suitable for cleaning materials under dry and wet conditions. 3. The brush wire can overcome the shortcomings of domestic brush wire such as heat resistance, poor wear resistance and static electricity during the cleaning process, and it is bonded into a roll and fails. 4. The drum body is made of stainless steel, seamless steel tube material or ABS engineering plastic material. 5. The drive unit adopts the motor directly connected to the worm gear reducer, with small installation space and convenient maintenance. 6. Application scope: 1) Used to clean slightly sticky powdery materials, such as coke and mineral powder, water slag, glass powder, fine mineral sand, etc. 2) Suitable for all belts, including belts with iron buckle joints or belts with damaged belt surfaces. Welcome to visit www.mxbrushmachinery.com